manualshive.com logo in svg

Idis DC-S1283WHX-IDIS, Руководство по эксплуатации

Поделиться
Скачать
Idis DC-S1283WHX-IDIS Скачать руководство пользователя страница 35

Part 1 - Remote Setup

35

Settings

Select the 

Settings

 tab and configure recording 

settings.

 

•

Recording Stream

: Choose a stream to use for 

recording. It’s possible to designate different streams 
for different recording modes.

 -

Time-Lapse/Pre-Event

: Designate the stream to 

use for recording in time lapse mode or event mode 
(pre-event).

 -

Event

: Designate the stream to use for recording in 

event mode (post-event).

 -

Preference

: Designate recording stream priority.

SD 
Recording

Recording using the 

Time-Lapse/

Pre-Event and Event

 streams 

designated above.

Network 
Recording

Record from the remote program 
using the designated recording 
streams. If the remote program 
does not support recording 
streams, however, 

Default 

Recording Stream

 specified under 

Video > Streaming

 will be used.

None

Record using the 

SD Recording

 

stream or the 

Network Recording

 

stream, whichever has the higher 
resolution.

 

•

Network Recording Failover

: Select a network 

recording failover mode. You can recording video on 
the SD card when recording from the remote program 
fails. Video is recorded using the stream designated 
under 

Recording Stream > Event

. 

Not supported if the recording mode under the 

Schedule

 tab is set to 

Always > Time-Lapse

.

Содержание DC-S1283WHX-IDIS






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды