manualshive.com logo in svg

Idis DC-S1283WHX-IDIS, Руководство по эксплуатации

Поделиться
Скачать
Idis DC-S1283WHX-IDIS Скачать руководство пользователя страница 23

Part 1 - Remote Setup

23

MAT

Select the 

MAT

 option to use the MAT (Motion Adaptive 

Transmission) feature during video transmission and 
recording.

 

•

Sensitivity

: Set the motion detection sensitivity. 

Higher values will result in more sensitive motion 
detection. This function is interworking with the 
setting of 

Event > Motion Detection

 menu.

 

•

Daytime

: Set the daytime range. The camera will 

consider the remaining time range as the nighttime. 
This function is interworking with the setting of 

Event 

> Motion Detection

.

 

•

Inactivity Period

: Set the Inactivity Period. If motion 

is not detected for the duration of time specified, 
video is transmitted and recorded using the frame 
rate designated below until movement is detected 
again.

 

•

Frame Rate

: Designate the frame rate to be used 

between the end of the Inactivity Period and the next 
motion detection. Video is transmitted and recorded 
at the designated frame rate between then end of the 
Inactivity Period and the next motion detection. Once 
motion is detected again, the frame rate designated 
under 

Streaming

 is restored immediately.

MAT (Motion Adaptive Transmission) 

is a feature 

that lowers the frame rate when motion is not 
detected to reduce the load on the network and save 
on storage space. Based on the specified sensitivity 
setting, no movement will be assumed if there is no 
change between two consecutive images.

Содержание DC-S1283WHX-IDIS






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды