Idis DC-S1283WHX-IDIS, Руководство по эксплуатации

Страница: 18 / 53

Part 1 - Remote Setup
18
• Mirroring : Select Horizontal Reverse or Vertical
Reverse to flip the image horizontally or vertically.
• Sharpness : Adjust the sharpness level. Adjust the
contours to make the images look sharper. Increasing
the value raises the sharpness level, but using too
high a value can result in unwanted noise.
•
Noise Filter
: Select the noise filter level. Noise filter
can reduce the noise in images taken under low-
lighting conditions. Increasing the value reduces the
noise, but using too high a value can result in blurry
images.
• 3DNR : Set whether to enable or disable 3DNR (3D
Noise Reduction). When 3DNR is enabled, the level of
background noise is reduced in low light conditions.
It does not cause overall image blurring which
might occur when using noise filter, but it may cause
afterimage (lag).
White Balance
Configure
White Balance
settings.
•
Mode
: Set the white balance mode.
- Auto : Select to adjust the white balance
automatically. The system identifies the light
source of where the camera is installed and sets up
the proper white balance for the conditions.
-
Auto (WIDE)
: The wider range of color temperature
is set than that of Auto mode. This function is
suitable when the camera is installed outdoor.
-
Auto (FULL)
: Adjust the white balance of whole
image area displayed on the screen. This function is
suitable when the light source of where the camera
is installed is special color.
- Color Temperature : Set the color temperature
manually.
-
Flames ~ Shade
: Select the type of light source
of where the camera is installed to set the proper
white balance for the conditions.