iDirect Evolution X3, Инструкция по установке и безопасности

Страница: 7 / 60

iDirect Evolution X3 Satellite Router Installation and Safety Manual vii
About This Manual
Thank you for purchasing an iDirect Evolution X3 Satellite Router. This manual provides
important safety and compliance information, and explains how to install and maintain the
iDirect Evolution X3 Satellite Router.
This chapter contains the following sections:
•
“Intended Audience”
• “Manual Contents”
• “Document Conventions”
• “Safety Definitions”
• “Getting Help”
Intended Audience
This manual is intended for use by the VSAT (Very Small Aperture Terminal) equipment
installer, System Engineer, and Network Operator responsible for maintaining the iDirect
Network. Only qualified service personnel should install and operate the iDirect Evolution X3
Satellite Router solutions. Familiarity with cabling and wiring practices is beneficial.
In this document, the iDirect Evolution X3 Satellite Routers are often referred to as IDUs
(Indoor Units) while radios and LNBs are collectively referred to as ODUs (Outdoor Units).
Manual Contents
In addition to the information in this chapter, this manual also includes the following:
•
Chapter 1, Introduction provides an overview and description of the iDirect Evolution X3
Satellite Router.
• Chapter 2, Safety Information describes general cautions.
• Chapter 3, Specifications covers the mechanical, environmental and connector interface
requirements.
• Chapter 4, Installation details procedures for installing the iDirect Evolution X3 Satellite
Router.