iDirect Evolution X3, Инструкция по установке и безопасности

Страница: 15 / 60

iDirect Evolution X3 Satellite Router Installation and Safety Manual 7
Safety Guidelines to Observe During Servicing
• Heat
Do not place the IDU near heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
• Accessories
To avoid personal injury or damage to the iDirect Evolution X3 Satellite Router, do not
place the chassis on any unstable rack, cart, stand, table, or bracket. Any mounting of
the product should follow the manufacturer’s instructions.
• Attachments
Do not use attachments unless recommended by the manufacturer as they may cause
hazards or damage to equipment.
• Restricted Access
This unit is intended for installation in restricted access areas. A restricted access area is
where access can only be gained by service personnel through the use of a special tool,
lock and key or other means of security, and is controlled by the authority responsible for
the location.
• Grounding
Never defeat the ground conductor or operate the equipment in the absence of a suitably
installed ground conductor. Contact the appropriate electrical inspection authority or an
electrician if you are uncertain that suitable grounding is available.
• Operational and Maintenance Safety
As you use your iDirect Evolution X3 Satellite Router, observe the following safety
guidelines:
•
Cables — Never use any other RF cable than what is supplied or recommended by
iDirect.
•
Cleaning — Do not use liquid cleaners or aerosol cleaners. Use a cloth for wiping up
dust or use a vacuum cleaner to remove dust.
2.4 Safety Guidelines to Observe During Servicing
When your iDirect Evolution X3 Satellite Router requires service, observe the safety guidelines
in this section.
2.4.1 Servicing
Do not attempt to service the Evolution X3 router internal assemblies, as opening and
removing covers may expose you to dangerous voltages or other hazards. There are no user
serviceable parts inside. Opening the units will void the warranty. Refer all servicing to
qualified service personnel.
2.4.2 Conditions Requiring Service
Unplug the Evolution X3 router from the AC Power outlet and refer servicing to qualified
service personnel under the following conditions: