iDirect Evolution X3, Инструкция по установке и безопасности

Страница: 23 / 60

iDirect Evolution X3 Satellite Router Installation and Safety Manual 15
Unpacking iDirect Evolution X3 Satellite Router Equipment
Figure 3 DB-9 to RJ-45 Adapter and Connector
You may need additional tools and equipment to install related equipment and cables. You
may also require test equipment to check signal, power levels, and communication links. See
Section 4.7.1, Console Port Cable Specifications and Pinout for cable specifications and RJ-45
pinouts.
4.2 Unpacking iDirect Evolution X3 Satellite Router
Equipment
The Evolution X3 router may be shipped in one or more shipping containers, depending on the
type of bundle purchased. Once you have received all of the boxes, perform the following
tasks:
•
Ensure the boxes are facing upward. (Refer to the box orientation arrows on the shipping
container.)
• Inspect all shipping containers. If any damage or other signs of mishandling are evident,
inform the carrier and either iDirect or the reseller.
• Remove the tape and any exterior covering from the box lid.
Note: Save the iDirect Evolution X3 Satellite Router shipping boxes after you have
unpacked the system. You will need these boxes if you want to move or ship the
system in the future.
Remove items from the box only as needed. Verify that you have received all of the proper
Evolution X3 router components and accessory items listed in your order, including the
optional equipment you ordered.
4.3 Components Normally Included in an Order
Prior to installation, ensure that you have received all of the necessary components for a
complete VSAT installation. If any items are missing or damaged, please contact your Network
Operator/Distributor for replacement.
A typical installation includes:
•
An iDirect Evolution X3 Satellite Router