
7
from the left side. Any remaining dots on the right side are blank.
•
The data to define a user-defined character is (y
╳
x) bytes.
•
Set a corresponding bit to 1 to print a dot or 0 to not print a dot.
•
This command can define different user-defined character patterns by each
fonts. To select a font, use
ESC !
•
A user-defined character and a downloaded bit image cannot be defined
simultaneously. When this command is executed, the downloaded bit image is
cleared.
•
The user-defined character definition is cleared when:
①
ESC @
is executed.
②
ESC ?
is executed.
③
FS q
is executed.
④
GS
*
is executed.
⑤
The printer is reset or the power is turned off.
•
When the user-defined characters are defined in font B (9
╳
17), only the most
significant bit of the 3rd byte of data in vertical direction is effective.
[Default]
The internal character set
[Reference]
ESC %
,
ESC ?
[Example]
•
When font A (12
╳
24) is selected.
•
When font B (9
╳
17) is selected.