13
•
This command cancels the previous horizontal tab settings.
•
When setting
n
= 8, the print position is moved to column 9 by sending
HT
.
•
Up to 32 tab positions (
k
= 32) can be set. Data exceeding 32 tab positions is
processed as normal data.
•
Transmit
[ n] k
in ascending order and place a NUL code 0 at the end.
•
When
[ n] k
is less than or equal to the preceding value [
n] k-
1, tab setting is
finished and the following data is processed as normal data.
•
ESC D NUL
cancels all horizontal tab positions.
•
The previously specified horizontal tab positions do not change, even if the
character width changes.
•
The character width is memorized for each standard and page mode.
[Default]
The default tab positions are at intervals of 8 characters (columns 9, 17, 25,...) for
font A (12
╳
24).
[Reference]
HT
22. ESC E
n
[Name]
Turn emphasized mode on/off
[Format]
ASCII
ESC
E
n
Hex
1B
45
n
Decimal
27
69
n
[Range]
0
n
255
[Description]
Turns emphasized mode on or off
•
When the LSB of n is 0, emphasized mode is turned off.
•
When the LSB of n is 1, emphasized mode is turned on.
[Details]
•
Only the least significant bit of n is enabled.
•
This command and
ESC !
turn on and off emphasized mode in the same way.
Be careful when this command is used with
ESC !
.
[Default]
n = 0
[Reference]
ESC !
23. ESC G n
[Name]
Turn on/off double-strike mode
[Format]
ASCII
ESC
G
n
Hex
1B
47
n
Decimal
27
71
n
[Range]
0
≤
n
≤
255
[Description]
Turns double-strike mode on or off.
•
When the LSB of
n
is 0, double-strike mode is turned off.
•
When the LSB of
n
is 1, double-strike mode is turned on.
[Details]
•
Only the lowest bit of
n
is enabled.
•
Printer output is the same in double-strike mode and in emphasized mode.
[Default]
n
= 0
[Reference]
ESC E
24. ESC J n