idiag P100, Руководство пользователя, Страница: 24 / 30

25
Procedure
•
Ensure that water or other fluids cannot penetrate the base
module or detachable module.
• This precaution prevents electric short circuits and corrosion of
the sensitive electronic and mechanical parts.
• Never use corrosive polishes that contain solvents or abrasive
cleaning agents.
•
Alcohol and solvents will cause the material to become matt or
brittle.
•
Do not insert any objects such as brushes, cloths or even your
fingers when cleaning the air guide! These may damage the
sensors and mechanism.
•
Hand-held unit: Wipe surfaces with a lint-free cloth dampened with water and mild soap.
•
Rinse air-guiding parts by hand.
•
Allow all cleaned parts to dry thoroughly before using them again for training and before storing
them.
•
Allow the breathing bag to dry with the large opening at the bottom.
11.5 Disinfection
Frequency
•
See the “Hygiene overview” table in Chapter 11.3.
•
Disinfect the Idiag P100 parts as required.
Methods
•
Chemical methods (see below)
Preparation
•
Remove the battery before disinfecting the Idiag P100
•
Dismantle the air-guiding parts (see Chapter 9.2)
•
Clean all parts before disinfecting them (see Chapter 11.4 “Cleaning”).
Clean Wash by hand with water Wipe surfaces
Air guide
Mouthpiece
Breathing
bag
Base
module
Detachable
module
CAUTION