Operator Manual
Aspect 100RT
L100-3061 REV A
25
USER REPLACEMENT ITEMS
These are easily replaced by the operator.
See also previous sections for operator hand and foot controls, armboard pads and protective covers.
•
Standard Tabletop Pad
Pads are held in place by hook and loop fasteners. Simply pull pad up gently to remove. New
replacement pads are supplied with new self-adhesive fasteners installed and new mating pieces
for the tabletop. Peel off old fasteners from tabletop. Peel off the protective paper and carefully
place new pad into position. Apply pressure to complete installation.
Note: Pads comply to California Technical Bulletin 117 as well as Underwriters Laboratories 94 (UL94)
.
Standard Tabletop Pad Part Number X100-1742
LATEX
Not made with natural rubber latex