background image

0901039 Rev: C (05/01) 

Page 16 of 16 

',6&/$,0(5

Knight Inc. does not accept responsibility for the mishandling, misuse, or non-performance of the 
described items when used for purposes other than those specified in the instructions. For hazardous 
materials information consult label, MSDS, or Knight Inc. 

:$55$17<

All Knight controls and pump systems are warranted against defects in material and workmanship for a 
period of ONE year. All electronic control boards have a TWO year warranty. Warranty applies only to the 
replacement or repair of such parts when returned to factory with a Knight Return Authorization (KRA) 
number, freight prepaid, and found to be defective upon factory authorized inspection. Bearings and pump 
seals or rubber and synthetic rubber parts such as “O” rings, diaphragms, squeeze tubing, and gaskets 
are considered expendable and are not covered under warranty. Warranty does not cover liability resulting 
from performance of this equipment nor the labor to replace this equipment. Product abuse or misuse 
voids warranty. 

World Headquarters: 

20531 Crescent Bay Dr. 

Lake Forest, CA 

92630-8825 USA 

TEL: (949) 595-4800 
FAX: (949) 595-4801

Atlanta Branch: 

8111 Technology Dr. NE 

Covington, GA 

30014 USA 

TEL: (770) 787-9400 
FAX: (770) 787-1155

Toronto Branch: 

2880 Argentia Road, Unit 6 

Mississauga, Ontario 

L5N 7X8 Canada 

TEL: (905) 542-2333 
FAX: (905) 542-1536

London Branch: 

#15 Brunel Centre 

Newton Road, Crawley 

West Sussex UK RH102UB 

TEL: (44) 1293-615570 
FAX: (44) 1293-615585

Sydney Branch: 

Unit 28, 317-321 

Woodpark Rd., Smithfield 

NSW Australia 2164 

TEL: 61-29-725-2588 
FAX: 61-29-725-2025

Amsterdam Branch: 

Marssteden 68 

7547 TD Enschede 

The Netherlands 

TEL: 31-53-428-58-00 

FAX: 31-53-428-58-09 

.1,*+7 ,1&

  A Unit of IDEX Corporation 

Содержание Knight Trak II KTL-6503

















Отзывы: