Idex APF 2-TurboFighter, Инструкция по эксплуатации

Страница: 54 / 72

Seite 18/36 AWG | Instructions manual | Alco Power Fighter Manual Monitors Product description
3.2.1.4 Throw distance
The throw distance depends on the type of nozzle, the throughput rate and the extinguishing
agent used.
The throw distance can be determined using the diagram below.
Fig. 3-2 Throw distances
140
150
130
120
110
100
90
80
70
60
50
40
30
Throw distance in m
Values apply for 8 bar operating pressure
1000 5000 10000 15000 20000
Flow rate in l/min
Full jet nozzle
MZ nozzle
Foam pipe
All values apply in still air conditions and at a pipe work angle of
approx. 25° to 30° values for MZ nozzles in hollow jet position
Values for foam pipes at flow rate of water, at flow rate of foam all values less 8 % All values apply in still air conditions
40
50
30
20
10
0
0 10 20 30 40 50
Values apply when using BC powder and
at 12 bar medium vessel pressure
Flow rate in l/min
Throw distance in m
140
150
130
120
110
100
90
80
70
60
50
40
30
Throw distance in m
Values apply for 12 bar operating pressure
1000 5000 10000 15000 20000
Flow rate in l/min
Full jet nozzle
MZ nozzle
Powder pipe
Foam pipe
140
150
130
120
110
100
90
80
70
60
50
40
30
Throw distance in m
Values apply for 10 bar operating pressure
1000 5000 10000 15000 20000
Flow rate in l/min
Full jet nozzle
MZ nozzle
Foam pipe