Identiv CLOUD 3700 F Скачать руководство пользователя страница 6

Страница: 6 / 82

Reference Manual for the CLOUD 370x F Contactless Desktop Readers

Document Version 1.0

Last revised on 2014-07-22

Page 6 of 82

Legal Information

1.1:

Disclaimers

The content published in this document is believed to be accurate. However, Identiv does not provide

any representation or warranty regarding the accuracy or completeness of its content, or regarding the

consequences of your use of the information contained herein.
Identiv reserves the right to change the content of this document without prior notice. The content of

this document supersedes the content of any previous versions of the same document. This document

may contain application descriptions and/or source code examples, which are for illustrative purposes

only. Identiv gives no representation or warranty that such descriptions or examples are suitable for

the application that you may want to use them for.
Should you notice any problems with this document, please provide your feedback to

[email protected]

1.2:

FCC Rules

1.2.1:

Section 15.21 Information to User

Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

1.2.2:

Class B, Section 15, Subpart C, Section 15.225

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Содержание CLOUD 3700 F



















































































Результаты поиска

Содержание CLOUD 3700 F

Отзывы:

Похожие инструкции для CLOUD 3700 F

Бренды по названию

Популярные бренды

Identiv CLOUD 3700 F, Справочное руководство

Результаты поиска

Содержание CLOUD 3700 F

Отзывы:

Похожие инструкции для CLOUD 3700 F

Бренды по названию

Популярные бренды