NOT-AD-01
–
Novembre 2020 (version 1.0)
7
SAFETY PRECAUTIONS
Failure to observe the precautions for use may result in the risk of serious injury.
•
Use the bedside table only as described in this manual.
•
Install the bed table on a flat surface.
•
Store the bedside table in an indoor environment, away from moisture and dust.
•
This bedside table uses a high-pressure pneumatic cylinder to adjust the height of the bed top. Do not
remove the locking pin from the column assembly before use.
•
Before use, make sure that all parts are present and in good condition. In case of damage, please contact
your dealer.
•
Carefully follow the assembly instructions and ensure that all components are properly secured before
use.
•
If any parts are damaged, broken or worn, contact your dealer.
MOUNTING
INSTALLATION
Place the bedside table on a clear surface and remove the packaging. Do not discard the packaging before the assembly is
completed.
STEP 1
Place the table upside down on a flat surface as shown.
Insert the base above the table top frame, aligning the screw holes as shown
Insert the hexagon socket screws through the frame into the table top frame as
indicated.
Use the M8 hexagonal key to tighten the screws.
