IDENTEC SOLUTIONS i-MARK 2 Скачать руководство пользователя | Manualshive

Страница: 3 / 55

background image

i-MARK 2 / i-MARK 3

USER

MANUAL

VISIBILITY DELIVERED.

PAGE 3 OF 55

Radio Frequency Compliance Statement

IDENTEC SOLUTIONS is the responsible party for the compliance of the following devices:

MODEL:

i-MARK 2

i-MARK 3

FCC ID:

O2E-ILR-IM2

O2E-ILR-IM3N

CANADA:

3538B-IM3

EUROPE:

CE

CE

The user(s) of these products are cautioned to only use accessories and peripherals approved, in
advance, by IDENTEC SOLUTIONS. The use of accessories and peripherals, other than those approved
by IDENTEC SOLUTIONS, or unauthorized changes to approved products, may void the compliance of
these products and may result in the loss of the user(s) authority to operate the equipment.

Operation is subject to the following conditions: (1) these devices may not cause harmful interference,
and (2) these devices must accept any interference, including interference that may cause undesired
operation of the device.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communication.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his/her own expense.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Industry Canada Compliance

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.

«
1
2
3
4
5
...
»

Содержание i-MARK 2
























































Отзывы:

Нет отзывов

Похожие инструкции для i-MARK 2

Бренд: Gallagher Страницы: 13

Бренд: VDO Страницы: 18

Бренд: Nakamichi Страницы: 31

CLP-7200 Series

Бренд: Citizen Страницы: 2

Бренд: Land Pride Страницы: 32

Бренд: Meyer Страницы: 34

OBID i-scan ID ISC.MR100

Бренд: Feig Electronic Страницы: 118

Бренд: Blaupunkt Страницы: 21

Бренд: Onkyo Страницы: 36

Бренд: VDO Страницы: 2

Бренд: Clarion Страницы: 32

Бренд: Pioneer Страницы: 7

Бренд: Bartec Страницы: 31

Бренд: G Sat Страницы: 26

Бренд: Unitech Страницы: 17

Бренд: Unitech Страницы: 132

Бренд: ERMA Страницы: 20

ATOM Document Reader

Бренд: Access Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды