Idemia VisionPass, Руководство по установке

Страница: 60 / 76

60
VisionPass - 2019_2000045728
5.1.4 > Multi-factor mode
In this mode, the "identification" and "authentication" modes are available simultaneously; the user decides
which control method will be used:
by presenting his face to the sensor, thereby triggering the identification process,
by placing his contactless card on the reader, thereby triggering the authentication process,
This is the default mode for terminals fitted with a contactless smartcard reader.
For further information, please see the "Multi-factors method" section in the VisionPass Administration
Guide.
5.1.5 > Proxy mode
The Proxy mode is an operating mode where the access control main application is located in a distant
system. This is not a standalone mode like Identification and Authentication modes.
It means that the terminal becomes a slave of the host system application. The access control application
is running on the host system and uses VisionPass terminal high level functions:
Identification function
Authentication function
Read data on a contactless card
Access control result signal command
The VisionPass terminal is driven through an Ethernet (or Wi-
Fi™) link using TCP, SSL or TLS protocol.
The VisionPass terminal acts as a server: it is either waiting for a command or executing a command.
The commands allowed by the VisionPass terminal are described in the VisionPass Host System Interface
Specification document.
For further details about SSL or TLS on the VisionPass terminal, please refer to the VisionPass
Administration Guide.