7
PARTS
PREPARING THE DEVICE FOR OPERATION
INSERTING BATTERIES:
Caution! Before inserting or exchanging batteries, make sure that your hands are dry.
The device needs 2 „AAA” batteries. In order to ensure longer operational life of the device, it is
recommended to use alkali batteries
1.
Turn the battery compartment locking device at the bottom of the device counterclockwise
and remove the lid of the battery compartment.
2. Insert two „AAA” batteries (not included), paying attention to polarity as indicated in the
battery compartment.
3. Close the lid of the battery compartment by turning it clockwise. Remember that the lid of
the battery compartment can be attached only in one direction. Markings on the bottom of
the device and the lid of the battery compartment must match.
USING THE DEVICE
Caution! Do not use the device in case of damaged skin, rash, acne or other skin diseases.
Caution! Before each use, check the blades and the trimmer for possible damages. Damaged
blades or trimmer can cause cut-wounds.
OPERATING THE DEVICE:
Remove the protective cap.
The device can be switched on by pressing the On/Off switch. In order to switch the device off,
press the On/Off switch again.
You can now start shaving. Pay attention to the following information regarding dry and wet
shaving.
Battery compartment
locking device
On/Off switch
Shaving head
Body of the device
Protective cap
Brush
