Installation and set-up
6
6
A
. Insert the batteries in the
compartment, with the
end
of each battery facing away
from the cover.
Fit two rechargeable batteries in
each handset
Always use the rechargeable
batteries supplied — never
use any other kind of
batteries in the handset.
Make sure the battery compartment door is securely
in place. If you have problems fitting the batteries,
contact the Help Line on 0845 345 9677.
B
. Carefully close the battery
compartment door,
matching the
symbol on
the door to the
symbol
on the handset
Installation and set-up
Help Line:
0845 345 9677
(Local Call rate)
7
7
Charge the batteries for 15 hours
Before you use the handset for the
first time, it’s important to charge the
batteries fully.
The handset ‘beeps’ when it’s correctly
in position on the charging cradle.
Leave the handset on the charging
cradle for 15 hours.
Make sure the mains socket is
switched on if you want to use
the phone — it will not work
without electrical power
Connect the base unit to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into
the socket as shown
Switch mains power back on
8
Use the plug to
raise the shutter
before pushing
it into the socket
NOTE: the charger pod does not have
a connection to the telephone line.
The ‘battery
charge level’
symbol blinks
The navigation buttons
In the instructions, these buttons are
represented by arrows, as shown here.
UP
LEFT
RIGHT
DOWN
E:\Binatone2005\iDECT_X1\iDECT_X1_UK_draft02a.vp
25 August 2005 16:47:42
Color profile: Generic CMYK printer profile
Composite Default screen
C
. Turn the battery compartment door
anticlockwise (try using a 5p or 1p
coin) so that the
symbol on the
door matches the
symbol on the
handset
