IDEC SE2L Series, Руководство пользователя

Страница: 35 / 152

SE2L User’s Manual (SE9Z-B1865)
34
3.9.2 Muting stop condition
Muting function will stop when any one of the condition below is fulfilled:
a) One of the muting inputs switches to OFF-state.
b) When the predefined (preset) maximum muting time T2 exceeds (1 minute and above) (Figure 3-20).
c) Objects are detected in the protection zone which is not covered by the muting zone.
d) Error is detected by the self-diagnostics function.
e) During muting state when the area is switched to other area.
Figure 3-20 shows the muting sequence.
 Maximum muting period (T2)
Maximum muting period can be selected from one of these values
▶
1 minute
▶
6 minutes
▶
12 minutes
▶
Unlimited
When using the muting function in dual protection mode, Muting 3 and Muting 4 are configured in the
similar way. Same applies for muting input sequence, time interval between inputs and maximum muting
period.
Figure 3-20 Muting sequence