manualshive.com logo in svg

IDEC MicroSmart pentra FC5A-D12K1E, Руководство пользователя, Страница: 12 / 164

Поделиться
Скачать
IDEC MicroSmart pentra FC5A-D12K1E Скачать руководство пользователя страница 12

1: G

ENERAL

 I

NFORMATION

1-2

W

EB

 S

ERVER

 CPU M

ODULE

 U

SER

’

S

 M

ANUAL

FC9Y-B1278

Features

Logic Engine®

The Web server CPU module features the Logic Engine® to achieve fast execution of instructions — 0.056 

μ

s for a basic 

instruction (LOD) and 0.167 

μ

s for an advanced instruction (MOV). This improves real-time performance for executing the 

user program.

Basic Functions

The Web server CPU module is fully equipped with functions as a programmable logic controller to achieve the best 
system.

USB Port

The Web server CPU module has a built-in Mini-B type USB port as standard. By connecting your PC to the Web server CPU 
module with a USB cable, it is possible to switch the operating status of the Web server CPU module, confirm the I/O status, 
change register values, update programs, and perform system program updates.

Powerful Functions with the Ethernet Port

Various communication functions, such as server/client communications, Web server, E-mail, and SNTP, are possible 
through the built-in Ethernet port.
An overview of each function is shown in the table below.

Optional Modules

The Web server CPU module can be expanded with a variety of optional modules and function modules, enabling you to 
add functions to match your application. If the optional modules and function modules are installed to the Web server 
CPU module, the following functions can be expanded.

Memory Cartridge

A user program can be stored in an optional memory cartridge using WindLDR. The memory cartridge can be installed on 
another CPU module to replace the user program without the need for connecting to a computer. The original user 
program in the CPU module is restored after removing the memory cartridge. The user program can also be downloaded 
to the CPU module so that the user program in the memory cartridge is retained in the CPU module even after the 
memory cartridge is removed.

Clock Cartridge

An optional clock cartridge can be installed on the CPU module to store real time calendar/clock data for use with 
advanced instructions to perform time-scheduled control.

Function

Description

Maintenance Communication 
Server

The user program can be downloaded, uploaded, or monitored using WindLDR via Ethernet.

Server Connection

Modbus TCP server, user communication server, or maintenance communication server can 
be selected and used with each server connection. A maximum of eight server connections 
are available.

Client Connection

Modbus TCP client or user communication client can be selected and used with each client 
connection. A maximum of three client connections are available.

SNTP (Obtain current time)

The current time can be obtained from an SNTP server. The time obtained from the SNTP 
server can also be written to the clock cartridge to adjust the time. The time zone can be 
configured within the range of GMT-12:00 to GMT+13:00.

Send E-mail

A maximum of 255 e-mails can be configured and each e-mail can be sent using EMAIL 
instructions. English, Japanese, Chinese, Western European, and Unicode are supported so 
that you can use a variety of languages to configure e-mails.
When using English, the length of the e-mail subject can be up to about 180 characters, and 
the e-mail message body can be up to about 1500 characters.
Data register values can be embedded in the e-mail message body.

Web Server

The status and data register values of the Web server CPU module can be monitored, and 
data register values can be modified in the Web browser.
Web pages created by the user can be imported to WindLDR and downloaded to the CPU 
module. The maximum capacity of the user web page is 1MB.
Data register values can be displayed and modified in the user web page.

PING

PING can be sent using PING instructions to confirm if the specified remote host is active.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание MicroSmart pentra FC5A-D12K1E





































































































































































Отзывы:

Нет отзывов