manualshive.com logo in svg

IDEC MicroSmart pentra FC5A-D12K1E, Руководство пользователя, Страница: 104 / 164

Поделиться
Скачать
IDEC MicroSmart pentra FC5A-D12K1E Скачать руководство пользователя страница 104

10: E-

MAIL

10-6

W

EB

 S

ERVER

 CPU M

ODULE

 U

SER

’

S

 M

ANUAL

FC9Y-B1278

3.

Click 

New E-mail Group

 or select an existing e-mail address group and click 

Edit

 button.

The E-mail Group dialog box appears.

Group Name: Specify the name of e-mail address group to register in the E-mail Address Book dialog box.
Comment: The comment for the e-mail address group can be assigned. The contents or the length of the comment has 
no effect on the CPU module operation.

The e-mail addresses that have not been added to the e-mail address group are shown in the list box on the left. The 
e-mails addresses are listed in the order that they were registered in the E-mail Address Book dialog box. In order to add 
an e-mail address to the e-mail address group, select the e-mail address to add and click on the 

>>

 button. The selected 

e-mail address is moved to the list box on the right and listed to the bottom of the e-mails.
The e-mail addresses for the e-mail address group are shown on the list box on the right. The e-mail addresses are listed 
in the order that they were added to the e-mail address group. In order to remove an e-mail address from the e-mail 
address group, select the e-mail address to remove and click on the 

<<

 button. The selected e-mail address is moved to 

the list box on the left and listed to the bottom of the e-mails.

In order to delete unused e-mail addresses or e-mail address groups from the E-mail address book, select the e-mail 
address or e-mail address group to delete and click Delete button in the E-mail Address Book dialog box. When the 
deleted e-mail address is used in the e-mail address groups, the deleted e-mail address is removed from all e-mail 
address groups.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание MicroSmart pentra FC5A-D12K1E





































































































































































Отзывы:

Нет отзывов