B-1908-1(0)
INSTRUCTION SHEET - HS1L Series
Solenoid Type Safety Switch, Inside Connector type
( 6 / 6 )
2016.08
When installed on
the door(8)
8
Dimensions
(mm)
(RP)
*13 The actuator entry slot vertical to the mounting panel
*14 The actuator entry slot horizontal to the mounting panel
Type : HS9Z-A1S
Type : HS9Z-A2S
Note: Use the slot plug attached to the safety switch to close the unused actuator entry slot.
Note: When the actuator entry slot vertical to the moun ing panel is used: Install the interlock
switch on he panel using four mounting screws.
When the actuator entry slot horizontal to the mounting panel is used: Install the
interlock switch on he panel using three mounting screws.
Accessories dimensions
http://www.idec.com
Manufacturer: IDEC CORP.
2-6-64 Nishimiyahara Yodogawa-ku, Osaka 532-0004, Japan
EU Authorized Representative:IDEC Elektrotechnik GmbH
Heselstuecken 8, D-22453 Hamburg, Germany
DECLARATION OF CONFORMITY
We, IDEC CORPORATION 2-6-64, Nishimiyahara Yodogawa-ku,Osaka 532-0004, Japan declare
under our sole responsibility that the product:
Description: Safety Switch
Model No: HS1L-C
to which this declaration relates is in conformity with the EC Directive on the following standard(s)
or other normative document(s). In case of alteration of the product, not agreed upon by us, this
declaration will lose its validity.
Applicable EC Directive : Low Voltage Directive (2014/35/EU)
Machinery Directive (2006/42/EC)
Applicable Standard(s) : EN 60947-5-1,GS-ET-19
Type : HS9Z-A3S
HS9Z-A1S
33
88
4
104
7.5
2
49
5
51
70.3
(RP)
45.4
4
5.5
35
1.5
10
121
129
26
23.5
45
63
5
19.2
22
89
(65.8
)
10
36
55.8
HS9Z-A2S
(3.5
±0.5
)
(7.0
±0.5
)
4
5
61
12.3
*14
*13
40
5.4
44.5
21
15
23.5
*33.5
26
89
RP: Actuator mounting reference position
Safety Switch dimensions
(RP)
21
±0.5
17.5
±0.5
(51.3)
11 5
(RP)
4-M5 screw
Safety switch Mounting Hole
Layout
* Use this mounting hole when a
strong actuator retention force
is imposed to he actuator entry
slot vertical to the mounting
panel.
Stopper film
Angle ajusting screw
(M3 hexagon socket set screw)
(supplied)
Mounting Hole Layout
2-M6
20°
(21)
33 max.
2
30
5
12
18
3
R3.2
72
58
44
58
17.6
20
Actuator cover
(supplied)
Mounting Hole Layout
22
2-M5
90°
5.1
3
17.6 43
40
(45.1)
42.6
0.8
12 3
22
40
9
49.3
43
17.6
3
5.1
Φ15.0
Φ5.1
0.8
19 3
Φ15
Φ5.1
22
11.5
20 5
Verschlusskappe
(Lieferumfang)
9
Precaution for Disposal
Dispose of the HS1L-C safety switch as an industrial waste.
When installed on the door
(8)
