IDEC HR6S-AF, Оригинальное руководство пользователя

Страница: 78 / 93

Diagnostics
78
HR9Z-B2192 8/2020
LED ERROR - Detected Errors
This LED lights solid in conjunction with additional LEDs to indicate detected errors. In the case of
a detected error, the device transitions to the defined safe state. You must remove the cause of
the detected error and perform a power cycle of the device to exit the defined safe state and
resume operation. Contact your IDEC CORPORATION service representative if the condition
persists.
State In conjunction with additional
LEDs
Meaning Remedy
Additional LEDs State of
additional LEDs
Solid on STATE,
START and S##
Flashing
synchronously
General error detected.

Verify correct wiring.
Solid on STATE,
START and S##
Solid on Configuration error
detected.

Verify that the positions of the
selectors are appropriate for the
application to be implemented.
Solid on POWER Flashing Power supply error
detected.

Verify correct wiring.

Use a suitable power supply.
Solid on STATE Flashing Error detected at safety-
related output.

Perform a power cycle.
Solid on START Flashing Cross circuit detected at
start input.

Verify correct wiring.
Solid on STATE and
START
Flashing
synchronously
Error detected at safety-
related output of
extension module.

Perform a power cycle.
Solid on S## Flashing Cross circuit detected at
safety-related input (for
example, incorrect wiring
or application function
with dynamization
selected, but
dynamization not
supported by connected
sensor/device).

Verify correct wiring.

Verify correct configuration.
Solid on S## and S## Flashing
synchronously
Cross circuit detected at
safety-related inputs (for
example, incorrect wiring
or application function
with dynamization
selected, but
dynamization not
supported by connected
sensor/device).

Verify correct wiring.

Verify correct configuration.