IDEAL Henrad SEC 80FF, Руководство по установке и обслуживанию

Страница: 15 / 64

15
Henrad SEC FF -
Installation
Re
s14
80
2
1
3
4
5
6
7
8
9
INSTALLATION
REAR FLUE OUTLET
11 REAR FLUE ASSEMBLY - Exploded View
12 WALL MOUNTING TEMPLATE
IMPORTANT.
For direct mounting (piping frame on wall) choose one
black circle in each group.
If using the stand-off brackets choose one dotted circle
in each group. Care MUST be taken to ensure the
correct holes are drilled.
1. Tape the template into the selected position.
2. Ensure squareness by hanging a plumbline as
shown.
3. Mark onto the wall the following:
a. The 4 wall mounting plate screw positions.
b. The position of the flue duct.
Mark the centre of the hole as well as the
circumference.
4. Remove the template from the wall.
1. An optional flue duct extension kit is required
for rear flue lengths greater than 580mm
(22
3/4
"). Refer to Frame 11.
2. When cutting the ducts always use the
cardboard support cutting aid provided.
LEGEND
1. Terminal
2. Weather seal
3. Duct assembly
4. No. 8 x 8 self-tapping screw
5. Inner flue seal
6. Flue turret
7. Turret seal
8. M5 x 10 pozi screw.
9. Turret clamp