#61-844
ND-7043-3
Page 13 of 22
5.4.
Audio Settings
Imager Sounds
Select “Off” to mute all audible outputs.
Voice Annotation
Select “Session” to add a voice message at the start of a set of images (A session
ends when the imager is switched off).
Select “Individual” to add a voice message to each saved image.
Select “Ind. and session” to add a common voice message at the start of a set of
images and add additional comments for each image.
Voice Playback
Select “Speaker” or “Headset” for the desired method of audible outputs.
Volume
Select the volume of the audible outputs from 0 to 9.
If session is selected the voice message is recorded in the audio settings by pressing
Function Key 3. Pressing Function Key 3 again stops recording. Function Key 2 can
be used to play back the recorded message. Function Key 3 can be used to re-record
if necessary.
