Page 2
#61-744
#61-746
600 AAC Clamp Meter
Instruction Manual
NCV
OFF
V
Ω
V
True RMS
40
A
600
A
M
HOLD
DC
K
AC
m
Ω
V
APO
CAT.III
600V
600A
CLAMP
61-746
CAT.III
600V
V
/
Ω
COM
WARNING
Read First: Safety Information
Understand and follow operating instructions carefully. Use the meter only as
specified in this manual; otherwise, the protection provided by the meter may be
impaired.
WARNING
To avoid possible electric shock, personal injury or death, follow these
guidelines:
• Do not use if meter appears damaged. Visually inspect the meter to ensure
case is not cracked and back case is securely in place.
• Inspect and replace leads if insulation is damaged, metal is exposed, or probes
are cracked. Pay particular attention to the insulation surrounding the
connectors.
• Do not use meter if it operates abnormally as protection maybe impaired.
• Do not use during electrical storms or in wet weather.
• Do not use around explosive gas, dust, or vapor.
• Do not apply more than the rated voltage to the meter.
• Do not use without the battery and the back case properly installed.
• Remove the test leads from the circuit prior to removing battery cap.
• Do not attempt to repair this unit as it has no user-serviceable parts.
• Replace batteries as soon as low battery indicator appears to avoid false
readings.
• Comply with local and national safety requirements, including the use of
appropriate personal protective equipment.
+
99 Washington Street
Melrose, MA 02176
