Ideal Curves 005-00036, Руководство пользователя

Страница: 11 / 24

11
• Press the Stop button on the screen.
• Press the Safety Stop button on top of the unit (the button will glow red when this is
activated).
• Press the power switch on the back of the unit to Off (press the “O” symbol).
• Detach the power cord from the back of the unit.
Home Screen
This is the main menu for the unit. From here, you can select
which type of energy you will use (radio frequency or ultra-
sound), select from tutorial videos in the Media section, or
access some basic information and device settings in the
Utilities section. To make a selection on this or any of the
screens, simply touch the “button” on the screen to make your
selection.
Settings Screen
When either the Radio Frequency or Ultrasound energy type
is selected, the display shows the control panel for the respec-
tive treatment. Functions and features common to both screens
are now discussed. Details about specific differences will be
discussed in Sections 5.3 and 5.4. The Settings Screen shows:
• The recommended body area that should be treated consis-
tent with the handpiece that is attached (highlighted in blue
on the body outline)
• The length of the treatment time that is currently selected
• The relative power level of the energy
• The handpiece that is connected to the unit
Details about specific differences will be discussed in Sections
5.3. To change the treatment time or the power, press the Up
arrow to increase the value or the Down arrow to decrease the
value. Minutes are selected in quantities of 10 minute incre-
ments from 10 to 40 minutes. Intensity is selected at levels of
1, 2, 3, or 4, with 1 being the lowest intensity level and 4 being
the highest.
NOTE:
Some time durations and intensity levels may not be available for some handpieces
selected. This helps to ensure safe and effective application of the treatment. The table below indicates the
recommended device settings for the indicated body parts.
Once the settings are selected, press the Ready Button to prepare the system to activate the handpiece.
The Ready button will transition to say “Standby”, and the Start button will appear. At any of these screens,
pressing the Home button will return you to the Home Screen. At this point, you may not make adjust-
ments to the treatment Time and Power. If you need to change either of these, press the Standby button to
return to the Standby screen.
From this screen, you can also select from tutorial videos in the Media section, or access some basic infor-
mation and device settings in the Utilities section.