Ideal Clima COMFOSPLIT IKARO, Руководство пользователя и инсталлятора

Страница: 38 / 68

EN
Comfosplit IKARO HW - User and installer manual
© Ideal Clima - Page 38 / 68
12 FOREWORD
Use the manual for the user and maintenance as follows:
each operator and personnel for use and maintenance of this unit will have to read through them
carefully this manual and observe the reported;
The employer is obliged to ensure that the operator meets the required training for operation of the unit
and he has read the manual; The employer must also accurately inform the user about accidents and
particularly on the risks arising from noise, personal protective devices prepared and the general
accident prevention rules provided by laws or international standards and the unit has the target
country;
The manual should always be available to user, manager, those responsible for transport, installation,
use, maintenance, repair and decommissioning;
keep the manual protected from moisture and heat and consider it an integral part of the unit for its
entire duration, and delivered to any other user or subsequent owner of the unit;
Pay attention to the following symbols. Their function is to emphasize essential information:
Report serious danger to persons and property that may occur with the use of the unit.
Tell things dangers and the unit itself that can occur with use.
It indicates additional information or suggestions for proper use of the unit.
The manufacturer has the right to update products and manuals without necessarily updating previous
versions, except in special cases.
This manual reflects the state of the art at the time of commercialization of the unit and cannot be considered
inadequate if it is later updated according to new technologies.
12.1 WARRANTY
The unit is guaranteed in accordance with the contractual agreements for sale.
The manufacturer is held exonerated from any responsibility and obligation, and will terminate the
form of guarantee provided for in the sales contract for any accident to persons or property which
may occur due to:
• Failure to follow the instructions in this manual regarding the installation, the use, maintenance and
events in any case extraneous to the normal and correct operation of the unit;
• Changes made to the drive and safety devices without prior written permission of the manufacturer;
• Attempts to repairs carried out on your own or by unauthorized technicians;
• Missed periodic, constant maintenance or use of not original spare parts.
In any case, should the user impute the incident to a defect of the unit, it must demonstrate that the damage
has been a major and direct consequence of this "defect."
12.2 OPERATING DIRECTIVES
The regulations described in this manual, are an integral part of the supply unit.