33
icos
-
Installation & Servicing
SERVICING
2
3
1
4
E
c
l
6073
47 FAN AND VENTURI ASSEMBLY REMOVAL AND CLEANING
1.
Disconnect the electrical leads from
the fan.
2.
Undo the gas pipe union connection to
the injector housing.
3.
Undo the screw on the fan mounting
bracket.
4.
Lift off the fan and venturi assembly.
5.
Inspect the injector for blockage or
damage.
48 BURNER REMOVAL AND CLEANING
1.
Remove the 6 screws securing the
burner (the centre screw at the rear is
extended to ease access).
2.
Lift off the burner from the combustion
chamber.
IMPORTANT
The burner head is a ceramic plaque
construction. Care must be taken to
ensure that
the burner is not placed
down upon its face
as this may cause
damage to the ceramic.
3.
Brush off any deposits that may be on
the ceramic with a SOFT brush.
4.
Inspect the sealing gasket around the
burner for any signs of damage.
Replace as necessary.
Note.
Take care not to disturb the ionisation
probes at the front and rear of the
combustion chamber.
nm8124
SER
VICING
202414-6.pmd
19/02/2008, 13:07
33
Содержание HE30
Страница 2: ...2 icos Installation Servicing ...
Страница 51: ...51 icos Installation Servicing NOTES ...
Страница 52: ...52 icos Installation Servicing NOTES ...