INSTALLATION
Buccaneer GT Range
- Installation
9
CAUTION: Must be carried out by a qualified professional
7
ELECTRICAL CONNECTION
As the electrical wiring has been carefully checked in the
factory, the internal connections of the control panel must
not be modified under any circumstances.
The electrical connections of the boiler must conform with
the IEE wiring regulations in force, respecting the indications
which appear on the electrical drawings supplied with the
control panel and the directives given hereafter.
Control panel
All the connections will be made on the connection block
provided for this purpose outside of the panel.
The connection cables may be fed along the inside of the
boiler by the cut-outs which are situated in the upper rear
panel of the boiler, the latter allowing the possible use of
electrical duct which are on general sale.
These cables will be attached to the rear metal sheet of the
panel with the help of cable clamps (7 cable clamps supplied
in a separate bag) fitted to the metal sheet.
Sensor connections
230/240V Connections
