Supplied By www.heating spares.co Tel. 0161 620 6677
2
British Gas RD1- User's
British Gas RD1
(
Natural Gas Models Only)
Introduction
It is essential that the instructions in this booklet are
strictly followed, for safe and economic operation of
the boiler.
Current Gas Safety (Installation & Use)
Regulations or the rules in force.
In your own interest, and that of safety, it is the law that this
boiler must be installed by a registered installer, in accordance
with all national and local regulations.
Electricity Supply
This appliance must be efficiently earthed.
Supply: 230 V ~ 50 Hz.
The fusing should be 3A.
Connection must be made in a way that allows complete
isolation of the electrical supply such as a double pole
switch having a 3mm (1/8") contact separation in both
poles, or a plug and socket, serving only the boiler and
system controls. The means of isolation must be
accessible to the user after installation.
330
RD1
G.C. No. 41 392 13
340
RD1
G.C. No. 41 392 16
350
RD1
G.C. No. 41 392 17
360
RD1
G.C. No. 41 392 20
370
RD1
G.C. No. 41 392 21
380
RD1
G.C. No. 41 392 24
3 100
RD1
G.C. No. 41 392 25
British Gas:
(Any internal reference to British Gas applies equally to Scottish Gas)
The British Gas RD1 is a range of cast iron wall mounted fanned flue gas central heating boilers. A complete
range of natural gas models is available.
The ideal replacement boiler...
Easy to install, easy to operate and easy to service. The British Gas RD1 really is the ultimate replacement
wall mounted range - you can depend on it.
Proven reliability...
Proven cast iron heat exchanger engineered and refined to be the most dependable wall mounted boiler
ensuring totally calm operation and quiet running, whatever the system demands.
Complete range...
There are 7 models in the range. All models include a Downward Routing Pipe Kit and an overheat thermostat.
Full system suitability...
Most models are suitable for connection to pumped open vent central heating systems, pumped central
heating combined with pumped or gravity indirect domestic hot water supply systems (note that the 100
model is not suitable for gravity installations).
They can also be used on sealed water systems.
Free Three Star Service Cover:
In addition to the guarantee, we will provide absolutely free a British Gas Services Three Star Service Cover
agreement to cover your complete new system during the first year. The benefits of this cover include
priority attention and a 24 hours a day 365 day a year helpline. Full details of the terms and conditions for
Three Star Cover schemes are available separately on request.
THE LOG BOOK SHOULD BE COMPLETED AFTER
EACH SERVICE AND KEPT WITH THESE
INSTRUCTIONS
All CORGI Registered Installers carry a CORGI ID card, and have a registration number. Both should be
recorded in your
Benchmark
Log Book. You can check your installer by calling CORGI direct on 0156 372 300.
