A S S E M B L I N G G U I D E L I N E
M A _ C A L E O S Y S T E M _ E N _ 2 1 A
Rev
. 21A
AKE GmbH
page 9 of 12
3.1.4 cover plate for double glass
Place the cover on side wall glasses, when two different units (for example Cold -> Neutral) are placed
next to each other.
Assembly specification
Installed on unit:
NOTE:
Due to the large number of different installation options / different glass types thicknesses,
various cover panels are available!
3.1.5 side cover plate
Place the side cover plate on the back panel of a unit when build-up back-to-back to each other or
use them as a cover panel for stand-alone devices.
Assembly specification
Installed on unit:
Attach the cover on the backwall end and fix it with the
locking screws.
NOTE:
Ensure that the closed side of the plate is installed facing to the outside direction.
3.1.6 waste air panel
Place the waste air panel on top of the side cover plates and fix it with screws or special bolts.
Assembly specification
Installed on unit:
NOTE:
Different panel length are available for each device width.
1
2
