bq
PRECAUTIONS
• Observe the notes mentioned below when
wiring to the power supply terminal board.
•
DO NOT
connect wires of different gauge to
the same power supply terminal. (Looseness
in the connection may cause overheating).
• When connecting wires of the same gauge,
connect them according to the figure.
Use the specified electric wire. Connect the wire
securely to the terminal. Lock the wire down
without applying excessive force to the terminal.
(Tightening torque: 1.31N.m 10%).
• When attaching the control box lid, make sure
not to pinch any wires.
• After all wiring connections are done, fill in any gaps
in the casing wiring holes with putty or insulation
material (field supply) to prevent small animals
or dirt from entering the unit from outside and
causing short circuits in the control box.
•
DO NOT
connect wires of different gauge to the same
grounding terminal. Looseness in the connection
may deteriorate the protection.
• Use only specified wires and tightly connect wires to the
terminals. Be careful that wires do not place external
stress on the terminals. Keep wiring in neat order so
that they do not obstruct other equipment such as
opening the service cover. Make sure the cover
closes tight. Incomplete connections could result in
overheating, and in the worst case, electric shock or fire.
DETACH THE INTAKE GRILL
• Slide the 2 grill hooks toward the middle of the
decoration panel.
• Open the intake grill and remove.
INSTALL THE DECORATION PANEL
• Align the indicate " " on the decoration panel to
the indicate " " on the unit .
• Attach the decoration panel to the unit with the
supplied screws as shown in figure below.
1 Intake grill
2 Grill hook
1
2
1 Decoration
panel
2 Screws (M5)
(supplied with
the panel)
1
2
INSTALLATION OF THE
DECORATION PANEL
• After installing the decoration panel, ensure
that there is no space between the unit body and
decoration panel. Otherwise air may leak through
the gap and cause dewdrop (See figure below).
