10
Flight modes
Apollo flight modes support,
ACRO , Balance, Height hold, GPS, and RTH
3 of flight modes can be
set to the 3 position switch at one time. The flight modes can be switched with the 3 position switch
on the transmitter
，
Please reference “IFLY-V4M Manual.”
Mode Status indicator
Apollo current mode status can be recognition by the bright LED on the bottom, about the LED status
instruction. Please reference “IFLY-V4M Manual.”
Failsafe control - Return to home (Loss of
control)
The quad will fly back over the place where it take off automatically, then land and shut down
automatically If the quad is out of control.
The process of the return to home:
1.
The quad will climb to 10 meters (distance from the quad to the ground) automatically, and then
start to fly back to where it took off. (The position where the motors were started)
2.
The quad will hover for about 5 seconds when it is back over the place where it took off.
3.
The quad will Land automatically after hovering.
4.
The quad will shut the motors down after landing.
