How to access the Menu:
- Long press the up button, enter the menu
- Short press the up and down button to select the menu target
- Short press the middle button to confirm
How to record video:
- You can set AUTO/Manual record in the menu
1. Auto record. Select “AUTO” in the menu option “Record Mode”. In this mode, the Skyvision starts recording when it turns on.
2. Select “Manual” in the menu option “Record Mode”. In display mode, long press the middle button to start recording, long press
middle button again to stop recording.
How to select different signal channels:
- In display mode, press up and down button to switch the current signal channel
Play Back: playback the previous video
Fast User Manual
FrSky Electronic Co., Ltd. www.frsky-rc.com Contact us: [email protected]
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
OSD
CH:R2
4
3
1
5
2
Signal channel:
F2-5760MHz F4-5800MHz
R1-5658MHz R2-5695MHz R3-5732MHz R4-5769MHz
R5-5806MHz R6-5843MHz R7-5880MHz R8-5917MHz
Current Signal channel. Short press up and down button to switch the
current signal channel.
Record status. When insert SD card to start recording, the status light will
be red and flash, that means TF is in record mode.
Current signal intensity. The max is 8, the min is 0.
Antenna 1 received signal strength.
Antenna 2 received signal strength.
1
2
3
4
5
User Manual
01140218
Menu functions
System Settings
Playback
Record Mode
Format SD-Card
About
User Manual
Exit
No SD Card!
Auto
Long press the up button to enter the menu
1
2
3
4
6
5
1
2
3
4
5
6
Playback:
playback the previous video.
RecordMode:
Auto:
Auto record. It starts recording when get video signal. If no video
signal, it stops recording.
Manual:
Manual record. Long press the middle button to start recording.
Format SD-Card:
Format SD card.
About:
About this Skyvision info and version info.
User manual:
Easy user manual.
Exit:
Exit.
Port definition
VTX upgrade port
3
1/4 screw
1
SD card slot
2
5.5 inch TFT
6
5.8G antenna port
5
5.8G antenna port
4
XT30 battery input (7V-26V)
9
DC input (7V-26V)
7
Power button
8
System load LED
12
Cooling fan
11
HDMI out
10
Power LED
15
RF signal intensity LED
13
Program flash LED
14
Confirm button
17
Down button
18
Up button (long press to access the menu)
16
3
6
8
9
7
10
1
4
5
2
11
12
13
14
15
16
17
18
