UM_T
EO
d8_v1_D
EF
16
3.4.System Menu
Push the Menu button to enter the system menu. Push the Menu button again to toggle through the menu items.
The available menu items are:
3.4.1.Load Preset
Turn the rotary encoder to select the preset you wish to load. Push the rotary encoder to select it, then turn it
again to select “YES” and confirm again by pushing the rotary encoder knob. The preset is loaded and all settings
are applied immediately. All settings that were in the unit prior to loading the preset will be erased. This action
can not be undone.
The presets contain all filter, dynamics, gain settings etc. Presets do NOT contain the name of the unit, network
configuration, automatic standby delay, user access rights and passwords.
3.4.2.Save Preset
Turn the rotary encoder to select the location of the preset. If that location is not empty, the preset in that
location will be overwritten. This action can not be undone. The system will ask you to give a name to the
preset name. Select a character in the cursor position by turning the rotary encoder; pushing the rotary encoder
confirms the character selected and moves the cursor to the next character to edit. Pushing the exit/ESC
button erases the last confirmed character. Once the name is set up, push the menu button again. If you want to
continue storing the preset, select Yes by turning the rotary encoder and confirm by pushing it. To cancel, push
the exit button. Now your preset is saved in the selected location.
The presets contain all filter, dynamics, gain settings etc. Presets do NOT contain the name of the unit, network
configuration, automatic standby delay, user access rights and passwords.
3.4.3.Access Level
The TEOd8 has the option of locking away the front panel controls to avoid tampering of settings by unauthorized
persons. To lock the unit, select “Locked” by turning the rotary encoder, and push it to confirm. The system will
ask you to enter a password. Select a character in the cursor position by turning the rotary encoder; pushing the
rotary encoder confirms the character selected and moves the cursor to the next character to edit. Pushing the
exit/ESC button erases the last confirmed character. Once the password is set up, push the menu button again
and the unit will be locked. ATTENTION: Make sure to remember the password! When the unit is locked and you
forgot the password, it is not possible to unlock it without contacting your local service representative. To unlock
the unit select “Unlocked” and enter the password. The password is automatically checked after each entered
character, and the unit will exit the system menu when the password is confirmed. The default password is
“Password”.
3.4.4.Version Information
By pushing the rotary encoder, the display toggles through some version information about the unit, as well as
some parameters like IP address, MAC address etc.
