IDC SFX3102, Техническое руководство

Страница: 5 / 18

TECHNICAL OPERATIONS
August 2014
5
Quick Set Up Guide - Star Pro G2 Audio Receiver
The IDC Receiver is shipped containing: 1 x STAR Pro G2 Audio Receiver
1 x Australian/IEC Mains Power Cord
Step 1 Test to ensure the satellite receiver is operational after shipment.
1. Set the receiver on a work surface; do not connect it to the antenna.
2. Plug the AC power cord into the rear panel and into the AC outlet.
3. The STATUS LED should now be RED.
4. After 2 minutes the:
•
STATUS LED will change to GREEN
•
LOCK LED will illuminate RED
•
CONTROL LED will be OFF
•
AUDIO 1 will be GREEN
•
AUDIO 2 will be GREEN
5. Power down the Receiver.
If any of the above steps fail, contact Macquarie Media Syndication.
Step 2 Rack mount the Receiver, connect the antenna feed and power up.
1. After 2 minutes the:
•
STATUS LED will change to GREEN.
•
LOCK LED will be GREEN.
•
CONTROL LED will BLINK GREEN.
•
AUDIO 1 will be GREEN.
•
AUDIO 2 will be GREEN.
2. Audio 1 or 2 may or may not be blinking, this is normal.
If any of the LEDs are not GREEN refer to the Installation Guide on pages 7
to 9 of this Manual.
Step 3 Attach the audio and closures’ connectors.
For wiring, refer to the Receiver Configuration on Page 15.