IDC SFX3102, Техническое руководство

Страница: 11 / 18

TECHNICAL OPERATIONS
August 2014
11
Receiver LCD Display Options
First, press the Red X Button twice. Then change the display using the Left/Right Keys.
Status 1 Stream 1 Channel Channel number for audio decoded by Audio 1
Status 2 Stream 2 Channel Channel number for audio decoded by Audio 2
Status 3 CH 1 Relays 1-4 State of the pulsing relays for Audio 1
Status 4 CH 2 Relays 1-4 State of the pulsing relays for Audio 2
Status 5 Metadata STR 1 Serial data being sent on Audio 1
Status 6 Metadata STR 2 Serial data being sent on Audio 2
Status 7 CH 1 CH 2 Audio level as a graph for each Audio Channel If frozen, recycle receiver
Status 8 Audio Backup Should display “Disabled”
Status 9 C/N Carrier to Noise Normal: 12db – 20db
Status 10 View Uncorr Biterbi Displays the % of uncorrected errors received Normal: <10%
Status 11 Signal Level Displays as a % the signal level Normal: 20% – 80%
Status 12 Sat 0 MAC Address Displays the MAC address of the receiver card
Receiver Menu
Stream 1-2 Relay
1-2
Meta data
1-2
Audio
Meters 1-2
C/N Uncorr
Errors
Signal
Level
SAT 0
MAC
Carrier A/B Freq
(MHZ)
Rate
KYSM/Sec
MOD
Standard
NCC
PID
22k Tone Polarisation
Preferred Copy to B
LNB Power
Supply
Freq
Reversal
AFC
Range
Ethernet
Interface
IP Address Net Mask DHCP
SAT
Interface
IP Address Net Mask
Routing Default
Gateway
DVB S2
Parameter
Spec
inversion
TS ID
Audio
Backup
NTP Status Forwarding
ETH 0
Forwarding
ETH 1
INFO
Firmware
version
Live Assist Livewire Pro audio Deviation
Reboot
Authorisati
on
1. Only items show in red allow editing
2. All other menu items are controlled by the head end
3. Before editing items shown in red you must:
Go to Authorisation
Enter the password B341