IDBLUE R8.HF Users Guide
13
Device Configuration
F
e
b
r
u
a
r
y
3
,
2
0
1
0
Bluetooth Name and PIN Code
IDBLUE R8.HF comes pre-configured with a device name (as printed on the label on the bottom
of the device). This is the Bluetooth name that will identify the device on a Bluetooth network.
It also comes pre-configured with a PIN code (sometimes referred to as a “pass code”); this is a
security feature that will only allow you to connect to IDBLUE R8.HF if the PIN code is known.
Note: The default factory pin code is ‘0000’
Renaming IDBLUE R8.HF to your own specification or naming scheme is recommended. Please
refer to IDBLUE Managers Guide for details on how to rename IDBLUE R8.HF.
Device Configuration
This section covers the basic configuration options for IDBLUE R8.HF. These options are typically
updated using either IDBLUE Manager or a custom application; please consult
IDBLUE Manager
User’s Guide
for more information on how to configure these settings.
IDBLUE Factory Default Settings
The following lists all of the factory default property settings for IDBLUE R8.HF device:
Block Count
= 1
Block Data
= 00000000
Block Index
= 0
Bluetooth Timeout
= 0 minutes (disabled)
Connected Mode
= TagID
Continuous Scanning
= False
Continuous Scanning Timeout
= 16 seconds
Device Timeout
= 10 minutes
Disconnected Mode
= Tag Verify
Duplicate Elimination Timeout
= 0 (no duplicate elimination)
Hold To Scan
= True
Note:
Press and release the power button to re-enable Bluetooth when it is disabled.
