IDA TRAKIT USA, Инструкция по эксплуатации

Страница: 34 / 36

34
You can change the Driver/Reference number on the fly. These data elements will occur
along with the location data in files captured while monitoring the activity of the fleet.
You can go directly to the Polling Setup, Playback Setup or Download Setup menu
options.
The Route Start Set and Route Stop Set are used to automatically indicate the start and
end parameters of the automatic routing feature.
Follow Vehicle
You may want the map to adjust automatically to follow a vehicle if it should travel past
the map shown on the screen. Left-clicking on the Follow Vehicle button
will let you select the vehicle that you want to follow.
Whenever this selected vehicle starts to go off-screen the map will automatically adjust to
position this vehicle in the middle of the screen.
Over-The-Air Buffer Download
Data captured and stored in the TRAKIT vehicle device can be downloaded to the
dispatch computer over-the-air. To do this select DOWNLOAD VEHICLE DATA from
the VEHICLES menu.
Vehicles
Download
Vehicle Data
You will be asked to select the vehicle. You will name the file and indicate where on
your computer you would like to place it. The system will then attempt to download all
of the data from the selected vehicle’s buffer. The amount of time this will take will
depend on the capacity of the radio system and amount of data to be downloaded. Once
downloaded the files can be used to play-back activity or for processing by the TRAKIT
ANALYZER to produce operation and management reports.