manualshive.com logo in svg

IDA TRAKIT USA, Инструкция по эксплуатации

Поделиться
Скачать
IDA TRAKIT USA Скачать руководство пользователя страница 29

 

29

Dynamic Timers 
The efficiency of tracking a fleet of vehicles on a radio system is greatly enhanced by 
maximizing the capacity of the communications link.  By sending location data only 
when necessary the burden on the communications link is lessened considerably.   
 
The Dynamic Timers feature provides for five speed ranges each assigned with a 
different time interval for sending the vehicle position.  Depending on the requirements 
of your application you can adjust these settings to promote the greatest efficiency of the 
system.  The interval is expressed in seconds and the speed is expressed in miles per hour 
or kilometers per hour depending on your setting in the Map Control, Display Options. 
 

Map Control 
 Display 

Options 

 
Each Speed/Interval corresponds with the time interval that is used for recording or 
storing positions. 
 
Turn Threshold Value 
This setting is the number of degrees of heading change that will trigger a direction-
change event for sending or storing location positions.  This feature can help define the 
actual route of a vehicle by showing all of the corners of the route taken.  It can also be 
useful to efficiently track a vehicle, not just getting time-interval positions but positions 
when the vehicle changes direction. 
 
When OK is clicked on the Remote Vehicle Setup box the system will attempt to update 
the settings in the vehicle.  The TRAKIT vehicle device needs to be operational for the 
settings to be updated in the vehicle. 
 

Содержание TRAKIT USA





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды