background image

 

32

 

5.1 REC SETTING   

 

This page allows you to set the recording rate and recording quality, and enables you to continue 

recording when the disk is full. 

 

REC RATE:

   

This option is for adjusting the number of pictures recorded every second into a storage disk. The 

recording rate controls the frequency at which the number of video pictures can be recorded.   

● 

For an NTSC unit, there are 11 different recording rates you can select from: 

30F/S (30 frames 

per second), 15F/S, 10F/S, 6F/S, 2.7F/S, 1.2F/S, 0.61F/S, 0.35F/S, 1F/8S, 1F/12S, 

and 

1F/16S.

 

● 

For a PAL unit, there are 11 different recording rates you can select from: 

25F/S (25 frames per 

second), 12.5F/S, 8.3F/S, 5F/S, 2.7F/S, 1.4F/S, 0.76F/S, 0.44F/S, 1F/8S, 1F/12S, 

and 

1F/16S.

 

Please refer to the table in section 4.1 for details. 

 

NOTE:  The 30 F/S (25 F/S for a PAL unit) recording rate can only function in a 352x240 (352x288 

for a PAL unit) resolution 

 

REC QUALITY:   

This option determines the image quality to be recorded. The DVR stores images in the 

compressed format and allows the image quality to be altered by the image size. There are 4 

levels of image quality you can select from: 

BEST

HIGH, STANDARD, 

and 

BASIC

. Selecting 

the BEST image for use provides higher-resolution recorded images, and normally takes up 

more storage space than a HIGH, STANDARD or BASIC image does. 

 

DISK FULL:

 This option determines the way to utilize storage media in case of a full disk

 

 

REWRITE:

 When the hard-disk is full, the device continues recording by displacing the old data. 

 

STOP:

 When the hard-disk is full, the device will stop recording. 

 

AUDIO:

 This option determines the way to record sound if necessary.

 

 

ON:

 Enables AUDIO recording. 

 

OFF:

 Disables AUDIO recording. 

 

NOTE: The audio function can only be activated at the following refresh rates in NTSC(PAL): 

10(8.3), 6(5), 2.7(2.7), 1.2(1.4), 0.61(0.76), 0.35(0.44) frames/sec.

 

MAIN MENU 

 

RECORD                   
ALARM / MOTION 
TIMER / SEQ / TITLE 
COMMUNICATION 
DISK 
SYSTEM 
 
 
GOTO REC PAGE

 

      REC SETTING 
 
REC RATE        : 10 F/S 
REC QUALITY   

: BEST 

DISK FULL 

 

: REWRITE

AUDIO 

  : 

OFF 

 

                           

     

         

 

 

MAIN PAGE 

SET REC RATE 

Содержание IV-400CD-SN




















































































Отзывы: