ID Photonics CoBrite Series, Руководство пользователя

Страница: 28 / 44

___________________________________________________________________
27
Co Brite
DX1
User’s Manual
5.5.13 Link status
This indicator signals status of communication between GUI and chassis controller.
5.5.14 Serial connection
This button will open a window that traces the communication between chassis
controller and GUI. See section 4 for details on command structure of the mainframe.
5.5.15 Interlock
This indicator will remain on status green as there is no interlock feature on the
chassis. Interlock is not available for CoBrite
DX1
and CoBrite
DX4
.
5.5.16 Save autostart config
This button will save the current configuration of the laser ports to a local EEPROM of
the instrument.
5.5.17 Enable Autostart
This button will enable recover the laser states after a power up to the state that was
save using the “Save autostart config” button . This feature will work only if a valid
conf iguration was saved before at least once using “Save autostart config”. Note that
some system revisions do not support this feature.
5.5.18 Minimize GUI
This button will switch the GUI to a compact variant. This is the default view upon
startup for DX4 and DX1 instruments.
5.5.19 All On/Off
Pressing this button will switch on or off all laser ports available.
5.6 Chassis view
Chassis view is accessed by clicking on the chassis of the left hand side tree view.