ID Photonics CoBrite Series, Руководство пользователя, Страница: 23 / 44

___________________________________________________________________
Co Brite
DX1
User Manual
22
5.3.3 USB serial port
This option can be used to connect to the instrument via the virtual Com Port option
as described in chapter 4.2. It is recommended using the default option to connect
via Mainframe description to the instrument.
5.3.4 Simulation mode
This mode allows operating the GUI without Hardware attached by configuring any
arbitrary Shelf configuration. It is used for demonstration and test purposes.
Once “Save and connect” is pressed, the setting is saved automatically for next
startup.
5.4 Troubleshooting
5.4.1 Instrument was not detected by the GUI
Open Windows device manager which can be found in Windows Control Panel.
Open the “Ports (COM & LPT) section. If correct ly installed and plugged in, a COM
Port is listed here indicating the device is available. If several ports are shown here
and identification of the device is not possible, unplug the USB connector and check
if one of the Ports disappears. Plug in again.
If no matching COM Port can be identified or an “unk n own device” is displayed, the
driver is not installed correctly.
Please change to the directory “Driver” on the supplied installation medium and
execute the file “CDM20802.exe” which installs a driver.
Reconnect the USB connection to your computer. The instrument should now
correctly be detected.