29
Dual-Bay RAID Storage Enclosure
for two 3.5-inch Serial ATA
Hard Drives
IB-RD3252
http://www.icybox.de
3.5
Display Information
In addition to the details about the hardware and device
the LCD display will also show
certain event information. Following is a list of possible messages and their meanings.
[HDD Error / Remaining 1xHDD]
When using RAID 0 and one of the drives fails, the alarm will go
and the display indicates that
only one good drive remains. Refer to the HDD LED’s in order to locate the defective drive.
[RAID Warning / Degraded Array]
When using RAID 1 and one of the drives fails, the alarm will go
and the display shows this
message. Press the [OK] button to temporarily mute the alarm and use the HDD LED’s in order to
locate the defective drive.
[XX Cable / Connected]
Shows which cable has been connected.
[Cable / Disconnected]
Shows when the cable has been unplugged.
[Rebuilding… / Hrs left xhxxmin]
Shows during the rebuild process of a RAID 1 array with an approximate time in hours and minutes
indicating how long it takes until the backup is done.
[Alarm / High Temperature] Indicates critical temperature (>60C)
[Alarm / Fan Failure] Indicates a fan failure or unexpectedly slow RPM.
[Detecting Disk / Starting…]
Shows during start up of the system.
[XX / Starting …]
Shows during start up of the system.
[Check DIP Switch] Shows when trying to change the RAID mode via LCM display but the DIP switch
is set to a
RAID mode already.
[RAID Mode Locked]
Shows when trying to change the RAID mode but the RAID switch is still in the locked position.
Содержание IB-RD3252
Страница 2: ...2 ...
