aTTaCH VEsa
To MoniToR
Mount flat VESA
to monitor using
4mm flat head
screws. Tighten
with Phillips drive.
Insert the
VESA plate
posts with
attached
monitor into
keyhole
slots in
face plate.
aTTaCH MoniToR
To FaCE PlaTE
If you have any questions, please call 1-800-558-4435
ICWUSA.com, Inc.
If you have any questions, please call 1-800-558-4435
ICWUSA.com, Inc.
Page 3 of 5
VT21 insTallaTion
VT21 INSTALLATION - rev 10/6/15 pjm
CHECK WiRE
ClEaRanCE
Using the
actuator handle,
slide monitor
and keyboard
up and down to
check for wire
clearance.
Actuator
handle
aDJUsT liFT assisT
An
adjustment indicator label
[
+
and
-
]
is low on the left side of
the unit.
•
Lift assist is increased when the
indicator is in the [+] position.
•
To increase lift assist, use the 5/32
hex key and turn adjuster screw to
the right.
•
Lift assist is decreased when the
indicator is in the [-] position.
•
To decrease lift assist, use the 5/32
hex key and turn adjuster screw to
the left.
View from
underneath
unit
Lift assist screw
Adjustment
indicator label
aTTaCH VEsa
To MoniToR
Mount Ball VESA
to monitor using
4mm flat head
screws. Tighten
with Phillips drive.
Insert the
VESA plate
posts with
attached
monitor into
keyhole
slots in
face plate.
aTTaCH MoniToR
To FaCE PlaTE
VTLP
VT AND VTTM
