ELECTRIC BICYCLE METER KT
—
LCD10Y Product User Manual
- 35 -
After finishing the parameter setting of C13, press
(SW) button for short to enter
C14 parameter setting interface.
○
C14 Power-assist tuning parameters Setting
Enter into C14 parameter setting interface, C14 parameter bar flashes.
C14 parameter setting interface
C14 is the parameters of power-assist tuning setting, with the default value of 2. The
power-assist is between1-4 gear, and it is invalid until P3 equals to 1. The setting range 1-3,
and press
(UP) button or
(DOWN) button for short to make selection.
C14 parameter definition table:
C14 Value
Assist strength of intelligent pedal motor
1
Weak assist strength of motor
2
General assist strength of motor
3
Stronger assist strength of motor
After finishing C14 parameter setting, hold
button
(SW)
shortly to save the
current set values and enter C15 parameter setting interface.
○
C15 Push-assist Speed Parameters Setting
Enter C15 parameters setting interface, C15 flashes.
C15 is the setting of push-assist speed, default value is 6, range from 4-6, press
(UP)
button or
(DOWN) button to choose
