ICT KT-LCD10Y, Руководство пользователя

Страница: 25 / 42

ELECTRIC BICYCLE METER KT — LCD10Y Product User Manual
- 23 -
original set parameters will be saved.
C Parameter Setting
After finishing P5 parameter setting, P5 parameter column stops flashing. Within 1
minute after stopping flashing, hold button (UP) and button (DOWN) for
about 2 seconds to enter C parameter setting environment.
○
C1 Power-Assist Sensor and Parameter Select Setting
Set C1 parameter first after entering C parameter setting environment, C1 parameter
column flashes.
C1 parameter setting interface
C1 is power-assist sensor and parameter select setting, its definition is shown in
following table. C1 setting ranges between 0-7, press button (UP) or button
( DOWN ) for selection.
C1 parameter definition table
：
KUNTENG power assist
sensors
C1
value
Start
Sensitivity
KUNTENG V12
power assist sensors
C1
value
Start
Sensitivity
Forward 5 Signal
00 Standard
Reverse 6 Signal
05 Standard
01 Lower 06 Lower
02 Lowest 07 Lowest
Forward 8 Signal
00 Higher
Reverse 10 Signal
05 Higher
01 Standard 06 Standard
02 Lower 07 Lower
Forward 10 Signal
00 Highest
Reverse 12 Signal
05 Highest
01 Higher 06 Higher
02 Standard 07 Standard