ICT International HFD8, Быстрый старт

Страница: 16 / 24

8 Configuration
Enable The Heater by clicking the check box
Set Heater power to value of 0.04 W/cm by using the slider bar to achieve the desired value.
Select Continuous Heating mode
Select prefered logging interval. For long term measurements every 1 minute to 5 mins is
adequate. For dynamic experiements such as cut stem, every 1 second or 10 seconds should
be employed.
Set to Instantaneous logging mode.
Under Logging Configuration, Check all supplementary parameters to be logged. Save
Configuration