ICT International HFD8, Быстрый старт

Страница: 2 / 24

HFD Sap Flow Meter Quick Start Guide
NOTE: This manual should be used in conjunction with the instructional videos
provided by ICT International to compliment each section of operation.
These videos are located on the ICT YouTube site
: http://youtube.com/user/ictintl
WARNING – The measurement needles of the HFD Sap Flow Meter are made of hollow
1.9mm stainless steel tubing. They can easily be bent, damaged or broken off if basic care is
not taken in handling the instrument. The significant length of the needles relative to this
very thin diameter demand
s
additional attention to detail when handling or transporting the
needles. Once installed in sleeves within the tree the needles
are
very robust.
NOTE: the needles gain much of their structural strength when combined with the sleeves.
1 HFD Sap Flow Meter Start-Up Check List
WARNING 1 - Please Read, Understand and Complete this checklist before unpacking the
HFD8 Sap Flow Meter
Have you Read the Manual? http://www.ictinternational.com/support/product-
manuals/
Have you watched the instructional videos? http://youtube.com/user/ictintl
Have you contacted ICT to schedule webcast training?
Email: sales@ictinternational.com.au Phone: + 61-26772 6770
2 System Requirements
2.1
Hardware
The ICT Instrument software does not require a powerful computer.
Recommended Minimum System Specifications:
Intel Atom 1.66 GHz and 1GB RAM or higher.